HomeProducts Motor/Lighting Controllers Power Planner II

The Power Planner II (#05027-35 or 60)

The Power Planner II, pictured at right, is an energy saving micro controller for larger single phase industrial and commercial applications. The unit, available in 35 and 60-Amp models, is installed by 'hardwiring' it to the equipment application. The unit operates from the standard electrical service in the home or plant of 110 V AC 60 Cycles, and will work with any appliance or equipment that uses induction motors that do not exceed the unit's maximum amperage rating of 60 amps. It will work equally well when supplied with 110 or 220 V AC at 50 or 60 cycles and has been tested and used on a variety of applications. The Power Planner II is also available in NEMA 12 rated housing.

Power Planner II Features:

Energy Management Controller (Millions of calculations/sec)
Micro controller based on 8-bit RISC technology
Proprietary Power Management software (Algorithms)
Reduces the power consumption of unmatched motor systems
Protects against brownout & power surges
Commercial and Industrial Temperature Range Option
Reduces operating temperature, thus doubling life of motor
Will operate at 120 or 240 Volts and 50/60 cycles
Fail-Safe Bypass Switch for taking unit in/out of circuit
Motor Full Load Current: up to 60 Amps
Rainproof NEMA 3 Housing Standard, NEMA 12 Available

Power Planner II Applications:

The Power Planner II is used for larger commercial, industrial and residential single phase motor applications up to 60 Amps such as commercial air conditioners, heat pumps, air compressors, pool pumps, large chillers, large exhaust fans, commercial refrigeration, conveyors, multi-motor combinations and other larger single phase equipment. The Powre Planner II has been installed and tested on various equipment types.

The Power Planner II Wiring Diagram contains wiring information and instructions for the unit.