Home Company Information Products Order Info Testimonials Contact Us FAQ

HomeProducts Motor/Lighting Controllers 10-Amp Power Planner I

The 10-Amp Power Planner I (#SP010-N)
You just plug it in to the receptacle and plug your appliance into it, now your on your way to savings!

The 10-Amp Power Planner I Side Plug model, pictured at right, is an energy saving controller for single phase industrial and household applications. The unit plugs into a standard wall outlet, with the equipment's plug connecting into the side of the Power Planner. The unit operates from the standard electrical service in the home or plant of 120 V AC 60 Cycles, and will work with any appliance or equipment that uses induction motors that do not exceed the unit's maximum amperage rating of 10 amps. It will work equally well when supplied with 120 or 240 V AC at 50 or 60 cycles and has been tested and used on a variety of applications.


10-Amp Power Planner I Features:

Energy Management Controller
Micro controller based on 8-bit RISC technology
Proprietary Power Management software (Algorithms)
Reduces the power consumption of unmatched motor systems
Protects against brownout & power surges
Commercial and Industrial Temperature Range Option
Reduces operating temperature, thus increasing life of motor
Will operate at 120 or 240 volts and 50/60 cycles
Current ranges is up to 10 amps


10-Amp Power Planner I Applications:

The Power Planner I can be used on single phase motors up to 10 Amps that drive refrigerators, freezers, evaporative coolers, clothes washers, gas dryers, dishwashers, soft drink machines, shop & garden tools and many other appliances and equipment types.


Power Planner I System Block Diagram:

 

Copyright © 2003 Energy Conservation Systems, Inc.