Click here to see what ACHR the NEWS has to say about the ArticMaster RMS!

About the ArticMaster RMS ArticMaster RMS represents over ten years of research and development, and is the first major breakthrough in the refrigerant industry in fifty years. In October 1996, the ArticMaster RMS was awarded "Best New Product" at the 1996 Northern California Plant Engineering and Maintenance Show. ArticMaster RMS is a product without competition. All ArticMaster models work equally well to achieve a minimum of 20% energy savings on all air cooled equipment, and 8% to 12% on water cooled systems. Most air cooled systems will achieve savings of approximately 35% or above, depending on the ambient temperature and condition of the equipment to which it is installed. The hotter it is, the better it works! Once ArticMaster RMS is installed, the reduced pressure in the system will not only save energy, but will also greatly increase the life expectancy of the compressor. ArticMaster RMS works with all refrigerants.

Easy to Install
Easily installed by a certified installer, ArticMaster RMS fits virtually any type of new or existing HVAC equipment, such as air conditioners, heat pumps and refrigeration systems.

"ArticMaster reduced run time on both compressors: Unit A, 31.1%. Unit B, 62.9% with an 8.9 degree increase in ambient temperature!"
- Office Depot -

Applications of The ArticMaster

Residential
Commercial
Industrial
Food Processing
Refrigeration

Reduces Energy Costs by a Minimum of 20%.. Guaranteed!
After ArticMaster RMS is installed, the manufacturer guarantees at least a 20% increase in cooling capacity and/or reduction in energy demand to run you existing air-cooled A/C system (8% minimum on water-cooled units). With proven energy savings of 20% to 40%, larger users of cooling and heating systems can realize significant energy savings.

Energy Use & Cost Savings
The Hotter It Gets, the Better it Works! ArticMaster RMS achieves maximum BTU output at ambient air temperatures of 90 degrees and greater while reducing energy consumption of the system. The greater the load demand or ambient temperature, the better it works.

Cut Overhead Costs
ArticMaster RMS is a gravity-assisted pump that utilizes a vortex through a fixed impeller to reduce compressor load. It has no moving parts to wear out and replace. Most importantly, while increasing the cooling efficiency of the unit, it reduces energy costs and extends the useful life of your system's compressor, thus saving you money on replacement costs and long-term maintenance fees.

**Must be installed by a Certified ArticMaster Installer**

Click here to see what people are saying about the ArticMaster!